Kayel Brewery Supplies 5 up 5 down Rack with Lift Truck

Up a Level Store Top View Cart Checkout

5 up 5 down Rack with Lift Truck

Online Catalogue | Two Tier Racking |  5 up 5 down Rack with Lift Truck

5 Up 5 Down Racking SystemBoth levels raised from the floor for loading with Separate Lift Truck
Click for Rack Dimensions

5 Up 5 Down Racking System
Both levels raised from the floor for loading with Separate Lift Truck

Price £1000.00
for Racking System including Mechanical Spring Stillages

Price £1200.00
for Racking System including Hydraulic Spring Stillages

Price £550.00
for Lift Truck



This rack is intended for use with a Lift Truck.

On this type of Racking System where a Lift truck is generally used to load the casks on to the rack we provide a Delivery and Installation service using our own engineers rather than sending the equipment by courier.

The amount of the Delivery and Installation charge depends on the size of system ordered as well as the location of the installation.

Please select the type of rack you require and request a quotation and we will email you back with a price including delivery and installation.

Cask Sizes
Up to 18 gallon casks on both levels.
22 gallon casks can be used but not on adjacent stillages - please call for further information.

Rack Length
The Standard Rack Length is 2850mm and allows for the use of any size cask on both levels up to 18 Gallons max. If only 9 Gallon casks are to be used a reduced rack 2480mm can be supplied at an additional charge.

Rack Height
18 gallon casks on both levels - 1765mm
18 gallon casks on lower level & 9 gallon casks on upper level - 1665mm
9 gallon casks on both levels - 1565mm

Stillage Type
The rack can be supplied fitted with either Mechanical Spring or Hydraulic Spring Auto-Tilt Stillages

Application
This type of rack is supplied when the casks are to be loaded using a separate lift truck. With both levels raised off the floor the front wheels of the truck can pass underneath the lower beam when loading.

Lift Truck
The use of a lift truck for loading is recommended but not essential if only 9 gallon casks are to be used. However if you do intend to manually lift casks on to the rack (2 man lift) we recommend a system using floor stillages on the lower level as this reduces the height to the upper level of stillages.
A distance of 1200mm minimum is required in front of the rack to operate the lift truck. The floor needs to be reasonable level with no pits or gullies in the truck operating area.
The overall height of the lift truck is 1700mm. If your ceiling height is below this dimension please call for further advice.

Installation
For the vast majority of racking systems supplied with a lift truck we offer a delivery and installation service using our own engineers. This installation charge varies depending on the size of rack required and where in the country the rack is to be installed. Please select the size of rack you require and Request a Quotation and we will email you back with a confirmed price.
Click for Rack Dimensions

Online Catalogue | Two Tier Racking |  5 up 5 down Rack with Lift Truck

Up a Level Store Top View Cart Checkout