Main Pages

Best Sellers

Mechanical Spring Auto Tilt Stillage

£75.00

Mechanical Spring Auto Tilt Stillage suitable for all casks from 9 to 22 gallons

find out more

Race Cask Ventilator

£7.95

Used to extend the life of Cask Ales by only allowing external air to enter the cask when beer is drawn.

find out more

Abbot Single Cask Tap

£9.50

A high quality Single Plastic Cask Tap with a single threaded outlet available in three thread sizes ¾ BSP, Y or L thread.

find out more

Hydraulic Spring Auto Tilt Stillage

£110.00

Floor Standing Hydraulic Spring Auto Tilt Stillage suitable for all casks from 9 to 22 gallons

find out more

5 up 5 down Rack (Both Levels Raised)

Online Catalogue | Two Tier Racking | 5 up 5 down Rack (Both Levels Raised)

Price: £1,145.00 (Excluding VAT at 20%)

Click for Rack Dimensions

5 up 5 down Racking System including Automatic Tilting Stillages

Racking System with both levels raised from the cellar floor

Cask Sizes
Up to 18 gallon casks on both levels.
22 gallon casks can be used but not on adjacent stillages - please call for further information.

Rack Length
The Standard Rack Length is 2850mm and allows for the use of any size cask on both levels up to 18 Gallons max. If only 9 Gallon casks are to be used and the standard lenght rack is too long, we can offer a reduced length rack 2480mm at an additional charge.

Rack Height
18 gallon casks on both levels - 1765mm
18 gallon casks on lower level & 9 gallon casks on upper level - 1665mm
9 gallon casks on both levels - 1565mm

Stillage Type
The rack can be supplied fitted with either Mechanical Spring or Hydraulic Spring Auto-Tilt Stillages

Application
This type of rack is supplied when the casks are to be loaded using a separate lift truck. With both levels raised off the floor the front wheels of the truck can pass underneath the lower beam when loading.

Lift Truck
The use of a lift truck for loading is recommended but not essential if only 9 gallon casks are to be used. However if you do intend to manually lift casks on to the rack (2 man lift) we recommend a system using floor stillages on the lower level as this reduces the height to the upper level of stillages.
A distance of 1200mm minimum is required in front of the rack to operate the lift truck. The floor needs to be reasonable level with no pits or gullies in the truck operating area.
The overall height of the lift truck is 1700mm. If your ceiling height is below this dimension please call for further advice.

Delivery & Installation
Prices quoted include delivery by courier and will require self assembly. Full assembly instructions and the necessary fixing bolts will be supplied.

Should you require delivery and installtion please call or email us and we will give you a price for this. Our delivery and installtion prices vary depending on how close the installtion site is to our premises in Sussex.

Click for Rack Dimensions

Price: £1,145.00 (Excluding VAT at 20%)

Choose a stillage type

Mechanical Spring Auto-Tilt Stillages

Hydraulic Spring Auto-Tilt Stillages (+£350)

Choose a rack length

Standard Rack Length 2850mm

Reduced Rack Length 2480mm (+£60.00)

Lift Truck

Lift Truck not required (+£0.00)

Lift Truck required (+£795.00)

Quantity:

Online Catalogue | Two Tier Racking | 5 up 5 down Rack (Both Levels Raised)